Because phase correlation is relative, there's really no wrong order way to do it. Having said that, to achieve the best performance-time reproduction, we recommend to use the top snare mic as the initial point of reference and align the drum tracks in this order:
- Align the Overheads mics to the Top snare mic (Top Snare = SEND1, Overheads = RECV1).
- Align the Bottom Snare mic and any additional Snare mics to the Top Snare mic (RECV1)
- If the Overheads are recorded onto a interleaved stereo track, set the same Auto-Align to SEND2(*) otherwise, set the Left Overhead to SEND2 and the Right Overhead to SEND3.
- Align the main Kick mic to the Overheads (Kick RECV2, SEND4), if there are additional Kick mics, align them to the main Kick mic (RECV4).
- Align the Top Tom mics to the Overheads (RECV2 or RECV3 in correlation with their position), if there are additional Tom mics, align them to the Top Tom mics.
- Align the Hi-Hat mic to the Overheads (RECV2)
- Align the Room mic to the Top Snare mic (RECV1). If you would like to preserve some of the delay between the microphones while still improving phase correlation, use the Next / Previous buttons to move the timing of the mic further or closer in time to the next correlative position.
(*) Each Auto-Align instance can SEND and RECV at the same time, where the SEND is always post Auto-Align process.
As a rule of thumb, the more similar the content is in the various microphones, the more it will benefit from mic alignment and the more it'll be required. Because of this, the Snare is a great reference starting point, as it has a wide frequency range, a very clear transient and usually has a strong presence in the Overheads and Room mics.